The BREEZAIRE WKC/WKCE Series cooling units are a compact design with cold air discharge on the bottom, which makes them ideal to be installed in cabinets.
Because of their configuration the WKC/WKCE series cooling units are not rated for specified number of cubic feet. They are intended for cabinets and other constricted enclosures.
The WKC cooling unit comes with two (2) optional thermostat systems. Mechanical (WKC Model) or Digital Electronic (Sentry III) (WKCE Model).
The WKC Model has a mechanical thermostat and its adjustments requires a 1/4" straight type screwdriver. Turning the adjusting screw clockwise lowers the set point, counter-clockwise raises it.
The WKCE Model has a digital electronic (Sentry III) thermostat that adds additional safety and convenience features:
- Large, easy to read, green LED display.
- Accurate, easy to adjust (no tools needed) readable set points with continuous reading of enclosure temperature or displaying of set point when changing enclosure temperatures.
- Power outage protection, which delays unit start up after power outages.
- Blocked airflow protection, which shuts down unit and protects wine in case of high temperatures caused by condenser blockage.
- Controls temperature by enclosure air sensors or optional bottle probe.
Units are shipped from the factory fully charged and ready for use when mounted in a wall and connected to 115 AC volt source.
Installation instructions
Warranty
There are four models to choose from:
| BREEZAIRE Model |
Electrical |
Dimensions (in) |
Weight |
US$
|
CDN$
|
WKC 1060
|
3 Amp |
18W x 10.5H x 16.5D
|
45 lb. |
$740 |
$1165 |
WKCE 1060
|
3 Amp |
18W x 10.5H x 16.5D |
45 lb. |
$780 |
$1225 |
WKC 2200
|
4 Amp |
18W x 10.5H x 16.5D |
55 lb. |
$855 |
$1310 |
WKCE 2200
|
4 Amp |
18W x 10.5H x 16.5D |
55 lb. |
$910 |
$1400 |
* All prices are subject to change without notice
Bottle Probe $20us $30cdn
All prices includes shipping
Back to the BREEZAIRE main page
